Hinged Derails with manual sign holder
Click picture for enlarged image
NOTE: Hinged derail is designed for use on tracks with wooden ties. Use screw spikes (supplied with Aldon Hinged Derails) for proper anchoring of derails to wooden ties. If you have steel ties see #4014-13, Base Plate Accessory. Do not install derails on resin or concrete ties.
Weight 156 lbs. (derail, sign, and holder)
Derail Sizing Form
Your Hinged Derail is made to order to fit your rail. We cannot process your order without the information you provide on the DERAIL SIZING FORM. It is ideal, but not essential, to submit your form with your order with the “upload completed sizing form” by the blue “add-to-cart” button above.
Click here to download the form or go to our download/upload page where you will find links to all our forms and instructions on how to upload the completed form.
The form is a “fillable” form (you may need to open the form in Adobe Acrobat Reader rather than in your browser for the fillable boxes to be active). Alternatively, print the form, fill it out, and then fax (847 623-6139), scan and email (email@example.com), or mail it (3410 Sunset Ave, Waukegan, IL 60087.)
You are using an older version of Internet Explorer. Because of security issues, you will not be able to complete your order using this browser. You can add items to your cart, but you won't be able to check out. Please use another browser to order.
This product is manufactured by Aldon®
Low-angle deflection bar accommodates longer wheel base of 6-axle locomotives. Allow ample space alongside the track for derailed vehicle to slide to a stop.
When you positively have to stop a freight car or locomotive — Derails are emergency stopping devices designed to guide the wheels of a freight car or locomotive off the rails. OSHA requires that every industrial siding be equipped with a derail to deny locomotive entry before railcars are ready to be removed.
Hinged derails are lifted on and off the rail by hand or with Lifting Lever (#4014-28 and #4014-25). The blue derail sign is separately lifted and lowered by hand. For more convenience consider the Pop-up Sign Holder for either 1-way or 2-way derails.
For use on wooden ties. Designed for freight cars & locomotives (4 axle & 6 axle) operating at 10 mph or less.
CAUTION: Install derails on exposed rail track only. For rails 90-141 lbs./yd Derails are sized to fit a specific rail height, including thickness of tie plate. Blue derail sign and holder are included with the derail (see MoonSign). Six screw spikes are provided for proper anchoring to ties. Height of derail above rail, 2"
To order shims which are necessary for attaching the Derails firmly to the track click HERE