Aldon MANUFACTURER of locomotive traction motor lifting dolly for traction motors

Aldon locomotive traction motor lifting dolly for installing and removing railroad traction motors

Click picture for enlarged image

Specifications:

Dolly frame welded steel with chrome-alloy joint pins.
Min. saddle height above rails: 9in.
Max. saddle height above rails: 24 in.
Lifting range: 15 in.
Wheel tread dia: 10 in.
Rolling clearance of Dolly frame above rail: 1"

Hydraulics

2-stage severe duty Simplex brand hand pump: 10,000 psi
Cylinder: 25-ton single action, spring-return Simplex ram
Fittings: quick disconnect with thread lock

Item #: 4025-11

Price: $6,220.00

Quantity:

You are using an older version of Internet Explorer. Because of security issues, you will not be able to complete your order using this browser. You can add items to your cart, but you won't be able to check out. Please use another browser to order.

This product is manufactured by Aldon®

When a drop table is not available for removing traction motors from locomotives. After the locomotive chassis has been raised with powered screw jacks, workers can roll the Dolly into position under the pivot end of the traction motor without having to step underneath the locomotive chassis.

Standing in the clear, a worker can raise the hydraulic arms 15 in. to adjust elevation of the pivot end of the motor.

Saddle between the lifting rams accepts an oak pad to cushion the load. Pad eyes on the Dolly permit workers to chain the motor to the dolly to prevent slippage. Long chains can also be attached to the Dolly frame for hauling the motor out from under the raised locomotive.

Aldon Company, Inc

Traction Motor Powered Lifting Dolly