Rail Clamping Wheel Block CB6-B (105-175 lbs. Rail)

Manufactured by Aldon®

Item #: 4016-02

Retail pricing:

$353.33

Description

For use on rails 105-175 lbs. 

Clamps grip rail head through wedge action.

DO NOT USE AS A OVERHEAD CRANE STOP.

  • Do NOT use for impact stops.
  • Wheel blocks can be padlocked for safety purposes. (See PDF attached at bottom of page.)
  • Apply brakes before installing blocks.
  • Use one chock at each end of the car.
  • Use on flat track only.

For rail 60-104 lbs., use Item #: 4016-01.

Note: Please read the Additional Cautions on the Safe Use tab below.

Weight: 50 lbs.

Other Essential Safety Products For Your Spur Track

RR Sign Holders

 

OSHA Sign Plates

 

Derails

 

Track Clearance Markers

 

Switch Stand Safety

 

Safe Use of Product

Caution

  1. Use on exposed rail for temporary chocking of railcars.
  2. Use on correct size rail (105-175 lbs/yd).
  3. USE ON FLAT TRACK ONLY. Do not use on descending grades.
  4. DO NOT USE TO STOP A MOVING CAR.Car must be at a complete rest, with brakes applied.
  5. Use at least 2 car blocks per railcar.
  6. Keep wedge tightly pounded into frame. Check wedge tightness frequently.
  7. Rail surface must be clean. Do not install this product on oily or greasy rail – product may slip.

Additional information

Shipping Weight 55 lbs
Shipping Dimensions 19 × 13 × 14 in